W8665A,E RF RECEIVER MODULE
69-1630-1
6
Fig. 7. Connecting the W8665E RF Zone™ Panel to the EMM-3 MiniZone™ Panel to control 1H/1C with up three
thermostat zone connections.
Fig. 8. Connecting the W8665E RF Zone™ Panel to the EMM-3U Zone Control Panel to operate up to 2H/2C with
up to three thermostat zone connections.
M20164B
R
R
C
C
COMM
T8665A
ZONE 1
THERMOSTAT
ZONE 1
ZONE 2
W8665E
LED
LED
LED
LED
ZONE 3
Y W G
M1 M4 M6 C
R
Y W G
ZONE 1
EMM-3
LED STATES:
COMM:
RAPIDLY FLASHING GREEN – RECEIVING INFORMATION FROM THERMOSTAT.
GREEN OFF – STANDBY, READY TO RECEIVE INFORMATION.
ZONE:
RED ON – SYSTEM (HEAT, COOL OR FAN) IS ON.
RED OFF – SYSTEM (HEAT, COOL OR FAN) IS OFF.
FLASHING RED – ERROR. NOT RECEIVING SIGNAL FROM THERMOSTAT.
RAPIDLY FLASHING RED – RECEIVER IN SET-UP MODE.
Y W G
ZONE 2
Y W G
ZONE 3
24V, 40 VA TRANSFORMER
R
C RZ RZ RZ
M1 M4 M6 C
R
Y W G
M1 M4 M6 C
R
Y W G
DIP SWITCH SETTINGS:
OFF: NOT SET-UP TO RECEIVE INFORMATION FROM A THERMOSTAT.
ON: READY TO RECEIVE INFORMATION FROM THERMOSTAT AFTER
SET-UP IS COMPLETE.
SET-UP:
MOVE DIP SWITCH TO ON POSITION AND MAKE THERMOSTAT CALL FOR FAN.
NOTE: ALL OTHER THERMOSTATS MUST BE OFF (NOT CALLING) DURING SET-UP.
ZONE 1
ZONE 2
ZONE 3
ON
T8665A
ZONE 2
THERMOSTAT
T8665A
ZONE 3
THERMOSTAT
FACTORY INSTALLED JUMPER.
THE THREE RZ TERMINALS ARE INTERNALLY CONNECTED.
1
1
R
C
R
C
M20571A
W8665E
Y W G
R
C
E W1 Y1 G W2 Y2 O B
L
ZONE 1
EMM-3U
Y W G
ZONE 2
Y W G
ZONE 3
24V, 40 VA
TRANSFORMER
R
C RZ RZ RZ
FACTORY INSTALLED JUMPER.
THE THREE RZ TERMINALS ARE INTERNALLY CONNECTED.
1
LEAVE O/B JUMPER DISCONNECTED ON EMM-3U BOARD.
2
2
1
R
C
E W1 Y1 G W2 Y2 O B
L
2
R
C
E W1 Y1 G W2 Y2 O B
L
2
