Honeywell W7006A, User Manual

Page: 15 / 32

Product Release Version 3.x.x. Home Controller Gateway User Guide
11 69-1321-2
Arming and Disarming Security
The Web, phone, and Wall Panel SUI interfaces let you change the security state
immediately. You can choose from among all available security states, just as you would
use the security keypad.
Security states are identified by number:
1 = Disarm, 2 = Away, 3 = Stay, 4 = Maximum, 7 = Instant.
If a door or window was left open, you will see that the system is not ready and cannot
be armed without first bypassing the zone. Press the
∨
key ( or
∧
key on the SUI) to
determine the zone number that remains open. Bypass the zone by entering the security
user code followed by 6, followed by the two-digit zone number.
Web
The MyHome Portal Web interface allows you to set the Security State by navigating to
the Security page (click on the Security Details button from the Home page).
To change security state: On the Security page:
!
Read the status window to determine the current Security State.
!
Enter your security user code.
!
Click on the key that specifies the state change you wish to use
SUI
To change security state: Press the
>
or
<
keys until the Security screen is displayed. The current Security State
is displayed in the dark box.
!
Enter your security user code.
!
Press the numeric key that corresponds with the state you wish to use.
You can also set the Security State from the main SUI screen.
!
Press a button to activate the screen.
!
Enter your security user code.
!
Press the numeric key for the Security State you want to use.
Phone
To change security state: At the main menu, press 2 to display the security menu. You will hear the current
Security State.
!
Enter your security user code.
!
Press the numeric key that corresponds to the state you wish to use.