Honeywell VX6, Reference Manual, Page: 39 / 356

Bluetooth 19
E-EQ-VX6RG-F VX6 Reference Guide
5. Doubletap the stylus on the Bluetooth scanner. The right-mouse-click menu appears.
6. Select Pair as Scanner to pair the VX6 with the Bluetooth mobile scanner.
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled “Bluetooth Beep and LED Indications”.
Note: After scanning the VX6 Bluetooth label, if there is no beep and no LED flash from the
Bluetooth device, the devices are currently paired.
VX6 without Label
If the VX6 Bluetooth address barcode label does not exist, follow these steps to create a unique
Bluetooth address barcode for the VX6:
First, locate the VX6 Bluetooth address by tapping Start | Settings | Control Panel | Bluetooth |
About tab.
Figure 1-9 About tab and Bluetooth Address
Next, create a Bluetooth address barcode label for the VX6
1
.
The format for the barcode label is as follows:
•
Barcode type must be Code 128.
•
FNC3 character followed by string Uppercase L, lowercase n, lowercase k, uppercase B
and then the Bluetooth address (12 hex digits, no colons). For example,
LnkB0400fd002031.
Create and print the label.
Scan the VX6 Bluetooth address barcode label with the Bluetooth barcode reader.
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled “Bluetooth Beep and LED Indications”.
Note: After scanning the VX6 Bluetooth label, if there is no beep and no LED flash from the
Bluetooth device, the devices are currently paired.
1
Free barcode creation software is available for download on the World Wide Web. Search
using the keywords “barcode create”.