Honeywell VOYAGER 1200G, User Manual, Page: 68 / 288

3 - 4
About the Battery
There is a danger of explosion if the batteries are incorrectly replaced.
Replace the batteries with only the same or equivalent type recom-
mended by the manufacturer. Dispose of used batteries according to
the recycle program for batteries as directed by the governing agency
for the country where the batteries are to be discarded.
Power is supplied to the cordless scanner by a rechargeable battery that is inte-
grated in the scanner handle. Batteries are shipped approximately 30% to 60%
charged. The battery should be charged for a minimum of 4 hours before initial
use to ensure optimal performance.
Voyager 1202g Battery Removal
Charging Information
The battery is designed to charge while the scanner is positioned in the
base unit. Refer to
Base LED Sequences and Meaning , page 3-7, for an
interpretation of the Charge Status indicators. Refer to Charge Only Mode
(page 3-10) if you need to charge a scanner without linking it to the base.
!