TB8220 COMMERCIAL VISIONPRO™ PROGRAMMABLE THERMOSTAT
63-2625—3
12
INSTALLER SETUP
Advanced Settings
The thermostat has advanced settings to match the HVAC
system. These settings can be adjusted to match specific
needs.
There are two different groups of settings:
— A complete set designed for the installation use.
— A simple set to limit accessibility for typical users.
Installer Settings (Complete Set)
Access to the installer settings is obtained as follows:
1.
From the main screen, press SYSTEM. Five blank touch
keys show on the bottom of the screen between DONE
and CANCEL.
2.
Press and hold the two blank keys on either side of the
center blank key for approximately five seconds. (See
Fig. 32.)
3.
The Setup Number displays to the lower-left area of the
screen. It is a four-digit code beginning with zero. The
current setting is displayed to the right.
NOTE: To cycle through the Setup Numbers, press the up or
down arrow.
Fig. 32. Entering Installer Setup.
User Settings (Simple Set)
Access to the user settings is obtained as follows:
1.
From the main screen, press SYSTEM. Five blank touch
keys show on the bottom of the screen between DONE
and CANCEL.
2.
Press and hold the center blank key approximately five
seconds.
3.
The Setup Number displays to the lower-left area of the
screen. It is a four-digit code beginning with zero. The
current setting is displayed to the right.
NOTE: To cycle through the Setup Numbers, press the up or
down arrow.
Fig. 33. Entering User Setup.
DONE
CANC
MO
TU
WE
TH
FR
SA
SU
SYSTE
M
EM
HEAT
OFF
Following
Schedule
Inside
Set To
M19923
DONE
CANCEL
TUE
PM
SYSTEM
OFF
COOL
CHANGE FILTER UV LAMP
Following
Schedule
Inside
M22766
