Honeywell UltraKey Lite HJC5000, Installation And User Manual, Page: 45 / 72

UltraKey Lite Controller Installation and User Guide
Document 800-07422 Rev A 45
08/10
Step 4: Configuring the Dynamic Keys
You can configure the hard keys on the web server.
1. From the side menu, click DynKey Configuration .
Figure 3-13 DynKey Configuration Tab
2. In the drop-down menu, select the key you want to configure.
3. In the right column, select the function you want to add to the hard key, then click
Add .
That selected function appears in the center column.
4. Repeat step 3 to add another function to the selected hard key.
5. Click Apply to save.
Note No more than 10 functions can be configured to a hard key.
Note Neither the number key (#) nor the Logon key can be configured.