11
Auto-On Timer:
When unit is in Standby Mo
de, press , the indicator light will illuminated the Temperature Display
will flash. Press to select the number of hours (1-24 hours) you want the unit to turn on. In 5
seconds without further o
peration, the Timer will start to function. The previous fan speed and
humidity setting will be maintained. The unit will turn on and continue running until the Water Tank
is full or until you switch it off manually. Timer must be set again after each use.
NOTE:
To cancel any Timer settings, simply press again, and the timer indicator light will
disappear.
NOTE:
The Power
indicator light will illuminated, it indicates the unit is on Standby Mode.
Auto-Off Timer:
While the unit is running, pre
ss , the indicator light will illuminated and the Temperature Display
will flash, press
to select the number of hours (1-24 hours) you want the unit to run before it
switches off. In 5 seconds without further operation, the Timer starts function. Timer must be set
again after each use.
TIMER CONTROL
The dehumidifier can be set to automatically switch ON or OFF for a selected period of time (between
1-24 hour intervals
). The Timer hours selection is displayed on the Temperature Display.
NOTE:
Before setting the Timer control, make sure there is power to the unit.
FUNCTION BUTTONS (CONTINUED)
USE & OPERATION (CONTINUED)
EN
WATER TANK FULL ALERT
When the Water Tank is full, the indicator will be illuminated. The unit will beep within 15 seconds.
The compressor will shut off. To switch off the indicator light, empty the Water Tank and when
replacing it ensure the tank is secured properly in place.
IMPORTANT:
Do not place the Water Tank on the floor when full. In case of an uneven base which may
cause the tank to spillover.
