5
4
D. BATTERY COMPARTMENT
•Accommodates 2 (two) UM-3 or AA 1.5V
alkaline batteries.
E. WALL-MOUNT RECESSED HOLE
•Keeps the main unit on the wall
F. REMOVABLE TEMPERATURE PROBE
WITH 10 FEET CABLE
•Registers outdoor temperature
FRONT VIEW
A. TEMPERATURE INFORMATION IN A
TWO – SECTION LCD DISPLAY
B. MEMORY BUTTON
•
Toggles between current, minimum and maximum
readings of the indoor and outdoor temperature
• Clears the maximum and minimum temperature
memory
C. C
°
/F
°
BUTTON
• Selects temperature display in Celsius or
Fahrenheit
REAR VIEW
B
A
C
MEMORY
°
C/
°
F
I N / O U T T H E R M O M E T E R
Outdoor
temperature
Indoor
temperature
E
D
F
7
6
GETTING STARTED
• The temperature probe can be placed indoors or
outdoors, the thermometer must be placed indoors
(refer to SECURING TEMPERATURE PROBE
OUTDOORS section).
• We recommend using alkaline batteries.
• Avoid using rechargeable batteries. (Rechargeable
batteries cannot maintain correct power requirements).
• Open the battery compartment door.
• Install 2 batteries (UM-3 or “AA” size 1.5V)
matching the polarity as shown in the battery
compartment.
• Replace the battery compartment door.
GENERAL OPERATION
After batteries are installed; the
indoor and outdoor temperature
readings will be displayed at the
same time. The outdoor
temperature will appear on the
larger section of the unit’s display with the icon
OUT
and indoor temperature will appear in the
smaller section with the icon
IN
.
MAXIMUM AND MINIMUM READINGS
The maximum and minimum record of the indoor and
outdoor temperatures will be automatically stored in
the unit’s memory.
To display the minimum,
maximum or the current
temperature readings press the
MEMORY
button.
To clear the temperature
memory, press and hold the
MEMORY
button for two
seconds and all previously stored readings will be
erased (current, minimum and maximum temperature
readings will be the same).
SELECT TEMPERATURE DISPLAY IN
CELSIUS OR FAHRENHEIT
Press
C
°
/F
°
button to select the temperature in Celsius
or Fahrenheit.
LOW BATTERY WARNING
A low-battery indicator [ ] will appear on the display
warning that the batteries need replacement.
THERMOMETER PLACEMENT
Thermometer can be placed on the flat surface, such as
desk etc. as well as wall-mounted.
For wall mounting, drive the screw (not included) into
the wall until the screw head extending about 0.14 inch.
For accurate temperature measurement, mount the
thermometer in an area with free air flow.
SECURING TEMPERATURE
PROBE OUTDOORS
• Drive a small screw (not included) into the wall at the
location selected for the temperature measurement
• Hang the temperature probe wire attachment loop
onto the screw
• Route the temperature probe 10 feet cable through
the window or pre-drilled hole.
• Locate the temperature probe away from direct
sunlight and heavy precipitation