manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 175 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 175

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

163

Display

Start > Settings > Control Panel > Display

The display might also called the touch screen.

Select the desktop background image and appearance scheme for the Thor VM3. Using 
the options on the Backlight tab, set the display backlight and keypad backlight timers 
when running on battery or external power.

Adjust the settings and tap the OK button to save the changes. Saved changes take 
effect immediately.

Factory Default Settings

Background

There is very little change from general desktop PC Display Properties / Background 
options. Select an image from the dropdown list (or tap the Browse button to select an 
image from another folder) to display on the Desktop, and then tap the OK button to 
save the change. The change takes effect immediately.

Background

Image

Windows CE

Tile image on 
background

Disabled

Appearance

Schemes

Windows Standard

Backlight

Battery power

30 seconds

External power

Varies by Power 
Configuration Mode 
selected

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments