manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 155 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 155

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

143

•

Excel Viewer

•

PowerPoint Viewer

•

Word Viewer

Note:

The viewer applications allow viewing documents, but not editing them.

Microsoft WordPad

Start > Programs > Microsoft WordPad

Create and edit documents and templates in WordPad, using buttons and menu com-
mands that are similar to those used in the desktop PC version of Microsoft WordPad.

By default WordPad files are saved as .PWD files. Documents can be saved in other for-
mats e.g., .RTF or .DOC.

Tap the ? button to access WordPad Help.

Remote Desktop Connection

Start > Programs > Remote Desktop

There are few changes in the Windows Embedded Compact version of Remote Desktop 
as it relates to the general desktop Windows PC Microsoft Remote Desktop options.

If installed, Remote Desktop on the Thor VM3 can be accessed by Start > Programs > 
Remote Desktop.

Select a computer from the drop down list or enter a host name and tap the Connect 
button. 

Tap the Options >> button to access the General, Display, Local Resources, Programs 
and Experience tabs. Tap the ? button to access Remote Desktop Connection Help.

Settings

Start > Settings

The Settings menu option may include the following:

Windows Explorer

Start > Programs > Windows Explorer

Control Panel

All control panels

Network and Dialup 
Connections

Shortcut to control panel. Connect to a network, create a new connection, and 
adjust parameters for client connections.

Taskbar

Set Taskbar parameters

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments