Honeywell Thor VM2W, User Manual, Page: 16 / 64

Rev. (a)
Place the Thor VM2W in the Dock
Back of Thor VM2W Front of Quick Mount Smart Dock
A. Notch on Thor VM2W
B. Release lever C. Upper Lip on Dock
D. Lower Lip on Dock
1. Locate the notch on the upper rear of the Thor VM2W (item A above).
2. Slide this notch over the top lip (C) of the Dock. Slide the Thor VM2W from side to side on the Dock to make sure it fully
engages on the lip of the Dock. If the Thor VM2W cannot be slid side to side, the lip is engaged.
3. Pull the quick release lever (B) on the Thor VM2W down and push the Thor VM2W against the Dock.
4. Release the quick release lever. The quick release lever catches the lower lip on the Dock and secures the Thor VM2W
to the Dock.
5. If necessary, adjust the viewing angle of the Thor VM2W.
Removing the Thor VM2W from the Dock
The Thor VM2W may be removed from the Quick Mount for limited periods of use or the transfer from vehicle to vehicle.
The UPS battery inside the Thor VM2W powers a fully functional Thor VM2W for a minimum of 30 minutes.
To remove the Thor VM2W from the Dock:
1. Pull the quick release lever (item B) downward on the back of the Thor VM2W.
2. Pull the bottom of the Thor VM2W away from the Dock.
3. Lift the Thor VM2W away from the Dock.
2-4