Chapter 3 — Configure the Computer
44
Thor CV31 Vehicle-Mount Computer User Manual
Configure 802.1x Security with Funk Security
Before you set 802.1x-WEP security with Funk security, you need to
enable the radio on your computer and set the date. To use TLS protocol,
you also need to load a user and root certificate. Intermec recommends
that you use WPA2-802.1x instead of 802.1x-WEP if possible.
1
Start Intermec Settings.
2
Select
Communications > 802.11 Radio > Funk Security
.
3
Select a Funk security profile to configure.
4
Enter the
SSID
.
5
For
Association
, select
Open
.
6
For
Encryption
, select
WEP
.
7
For
8021x
, select
TTLS
,
PEAP
, or
TLS
.
8
If you selected
TTLS
or
PEAP
:
a
For
Prompt for Credentials
, select
Enter credentials now
.
b
Enter a
User Name
and a
User Password
.
9
If you selected
TLS
, enter a
User Name
and
Subject Name
.
10
For
Validate Server Certificate
, select
Yes
.
11
Tap
OK
.
Configure LEAP Security with Funk Security
Before you set LEAP security, you need to enable the radio and set the
date on your computer.
1
Start Intermec Settings.
2
Select
Communications > 802.11 Radio > Funk Security
.
3
Select a Funk security profile to configure.
4
Enter the
SSID
.
5
For
Association
, select
Open
,
WPA
,
WPA2
, or
Network EAP
.
The default encryption is
TKIP
for
WPA
,
AES
for
WPA2
, and
WEP
for
Open
or
Network EAP
.
6
For
Prompt for Credentials
, select
Enter credentials now
.
7
Type a
User Name
and
User Password
.
8
Save your settings.