10
11
1. Press to view the previous single alarm time and arm
the alarm.
2. Press to disarm the single alarm and “OFF” will be
displayed.
3. When the single alarm time is displayed, press and hold
ALARM ON/OFF
for 3 seconds;
4. The alarm hour digit will flash, then press or to adjust
the desired hour.
5. Press
ALARM ON/OFF
again, the alarm minute digit
will flash, then press or to adjust the desired minute.
6. Press
ALARM ON/OFF
again and the single alarm is
set with the icon “ ” on the display.
WEEKDAY ALARM SETTING
1. Press to view the previous weekday alarm time and arm
the alarm.
2. Press to disarm the weekday alarm and have the
display read “OFF”.
3. When the weekday alarm time is displayed, press and hold
ALARM ON/OFF
for 3 seconds;
4. The alarm hour digit will flash, then press or to adjust
the desired hour.
5. Press
ALARM ON/OFF
again, the alarm minute digit
will flash, then press or to adjust the desired minute.
6. Press
ALARM ON/OFF
again and the weekday alarm is
set with the icon “ ” on the display.
SINGLE ALARM SETTING
Press
ALARM ON/OFF
to select the single alarm. If the
alarm is disarmed, the alarm time will be displayed as “OFF”.
If you choose not to set the
SINGLE ALARM
press
ALARM ON/OFF
again to advance to the
PRE-ALARM
setting procedure.
* Pre-Alarm
If the remote temperature (channel 1) is 32˚F or below,
the pre-alarm feature will be activated. The pre-alarm
time interval can be set for
15, 30, 45, 60, 75 or 90
minutes before the weekday or single alarm time.
This alarm will only sound if either the weekday or single
alarms are armed. It may warn you about the lower
temperature weather conditions and wake you up earlier in
case of a potential ice or snow. This alarm can be bypassed
during the set up if you choose not to use it.
If the calendar is displayed, pressing
ALARM ON/OFF
will
display the weekday alarm. Each press on
ALARM ON/OFF
button will display the next available alarm in the sequence of
Weekday alarm, Single alarm and Pre-alarm.
Press
MODE
to return to the calendar display.
PRE-ALARM SETTING
Press
ALARM ON/OFF
to select the pre-alarm time. If the
alarm is disarmed, the alarm time will be displayed as “OFF”.
The pre-alarm can be set only if the weekday alarm or the
single alarm is set. If you choose not to set the
PR E -AL AR M
press
ALARM ON/OFF
again to exit the setting procedure.
1. Press to view the previous pre-alarm time and arm
the alarm.
2. Press to disarm the pre-alarm time and have the display
read “OFF”.
3. When the pre-alarm time is displayed, press and hold
ALARM ON/OFF
for 3 seconds;
4. The minute digit will flash, then press or to adjust
the desired pre-alarm period in the sequence of 15, 30, 45,
60, 75, 90 minutes.
5. Press
ALARM ON/OFF
again and the pre-alarm is set
with the icon “PRE-AL” on the display.
USING THE ALARM AND SNOOZE
When the alarm sounds, press the
LIGHT/SNOOZE
key
to temporarily stop the alarm. After depressing
LIGHT/
SNOOZE
, the alarm sound will resume in 5 minutes. If the
alarm is not disabled after that, it will sound for 4 more
minutes and then will stop by itself.
Press
ALARM ON/OFF
to disable any alarm.
W
S