background image

16

15

DECLARATION OF CONFORMITY

We
Name: Hideki Electronics, Inc.

Address: 7865 SW Mohawk, Tualatin, OR 97062

Telephone No.: 1-503-612-8395
declare that the product
Product No.: TE211W

Product Name: Atomic Clock with Wireless

  Indoor/ Outdoor Thermometer

Manufacturer: Hideki Electronics Ltd.

Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road,

Kwai Chung, New Territories, Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

This device must accept any interference received, including

interference that may cause undesired operation.
The information above is not to be used as contact for support

or sales. Please call our customer service hotline

(refer to the warranty statement) for all inquiries instead.

STANDARD WARRANTY INFORMATION

This product is warranted from the manufacturing defects for

one year from date of retail purchase. It does not cover

damages or wear resulting from accident, misuse, abuse,

commercial use, or unauthorized adjustment and repair.
Note that online product registration is required to ensure

valid warranty protection.

To register your product, go to our Company website at:

www.hidekielectronics.us. Click Online Product Registration

under the Customer Service menu.

Should you require assistance with this product and its

operation, please contact our

Customer Service Hotline 1(866) 443 3543

Please direct all returns to the place of the original purchase.

Should this not be possible, contact Customer Service Hotline

for assistance and to obtain a Return Merchandise Authorization

(RMA). Returns without a return authorization will be refused.

Please retain your original receipt as you may be asked to

provide a copy for proof of purchase.

Hideki Electronics, Inc. reserves the right to repair or replace

the product at our option.
Copyright (2005) Hideki Electronics Inc. All Rights Reserved.

The Honeywell Trademark is used under license from

Honeywell Intellectual Properties Inc.

Honeywell International Inc. makes no representations or

warranties with respect to this product.

Summary of Contents for TE211W - Atomic Clock With Wireless Thermometer










Reviews: