23
24
22
21
19
20
18
17
RAINFALL HISTORY
The rainfall history records will be automatically stored in
the memory of the main unit. There are three historical
records that may be displayed – for the past hour, past day
and past week.
To display any of available rainfall history reading, use any
button on the front panel except the
ALARM
button. The
display sequence is:
LAST HOUR, LAST 24 HOURS
, and
LAST 7 DAYS.
To clear the memory, press and hold
MEMORY
button on
the front panel for two seconds and all previously stored
readings will be erased (all the historical records will
display a default reading
0.00
).
MAXIMUM AND MINIMUM TEMPERATURE
The maximum and minimum record of the indoor and
remote temperatures will be automatically stored in the
memory of the main unit.
To display the minimum, maximum or the current reading
press
MEMORY
button on the back panel.
To clear the memory, press and hold
MEMORY
button on
the back for two seconds and all previously stored readings
will be erased.
LOST COMMUNICATION
If the main unit display line for the remote temperature
sensor reading goes blank, press and hold
the back
DOWN
( ) button for 2 seconds to begin a new signal
search. If the signal still isn’t received, please make sure
that:
• The remote temperature sensor is in its proper location.
• The distance between main unit and remote temperature
sensor is not over 30 metres.
ALARMS
HIGH RAIN ALARM
The high rain alarm for the past 24 hours can be set and
displayed at any time by pressing
ALARM
button on the
front panel.
To set the high rain alarm,
• Press the
ALARM
button on the front panel until the
“
ALARM HI
” will appear on the upper right corner of
the rainfall information line.
• Press and hold the
ALARM
button for 2 seconds or until
the rainfall data digits will flash.
• Enter the rainfall amount you want to set the rain alarm
for using the front panel
UP
( ) or
DOWN
( ).
• Press the
ALARM
button again to confirm and the high
rain alarm will be set.
NOTE
: Press and hold the
MODE
button on the front panel
to display the rainfall reading in inches or mm.
TIME ALARMS
The Wireless Rain Gauge has three available time alarms –
Weekday alarm ( ), Single alarm( ) and Ice Warning
Alarm (
Pre-Al
).
• If
Weekday
alarm is activated, it will sound at the set time
and the alarm icon will flash Mondays through Fridays.
• If
Single
day alarm is activated, it will sound at the set
time and the alarm icon will flash only for this specific
day and will not activate on subsequent days.
• If
Ice Warning Alarm
is activated, it will sound at the set
time and alarm icon will flash if the remote temperature
for Channel One (1) reaches 2
°
C (35.6
°
F) and below.
NOTE: Ice Warning Alarm can be set only if one or both
of the Weekday or Single alarm are programmed.
SETTING THE WEEKDAY AND SINGLE DAY
ALARMS
• Press
ALARM
button once to enter into the alarms
setting mode. The default alarm is a Weekday alarm.
The abbreviation “
OFF
” with a letter “ ” next to it
will be displayed, if the alarm has not been set previously.
• Press and hold the
ALARM
button for two seconds. The
hour digit will flash.
• Enter the hour using back panel
UP
( ) or
DOWN
( ).
• Press the
ALARM
again. The minute digits will flash.
• Enter the minutes using
UP
( ) or
DOWN
( ).
• Press the
ALARM
button again to confirm and the
weekday alarm time will be set.
• Set
Single
day alarm if desired in the same manner.
SETTING THE ICE WARNING ALARM
If Weekday or Single day alarm is set, the Ice Warning
Alarm can be programmed.
• Press the back panel
ALARM
button once to enter into
the Ice Warning Alarm setting mode. The abbreviation
“
OFF
” with a “
PRE-AL
” next to it will be displayed.
• Press and hold the back panel
ALARM
button for two
seconds. The “
30
” number will flash, meaning that if
selected, the alarm will sound 30 minutes earlier than the
Weekday or Single alarm.
• Enter the desired minutes from 15 to 90 minutes in
15 minutes intervals, using
UP
( ) or
DOWN
( ).
• Press back panel
ALARM
button again to confirm and
exit from the alarm setting mode.
ACTIVATING THE ALARM
• Press
ALARM ON/OFF
button to enter into the alarms
mode.
• Press
DOWN
( ) to activate or
UP
( ) to deactivate
desired alarm. When alarms are activated, the
corresponding icons will be displayed.
SNOOZE
When any alarm sounds, press the
SNOOZE/LIGHT
button
to temporarily stop the alarm. After the
SNOOZE/LIGHT
is
depressed, the alarm sound will resume in eight minutes.
If the alarm is not disabled after that, it will sound for four
more minutes and then will stop by itself.
PRECAUTIONS
This product is engineered to give you years of satisfactory
service if handled carefully. Here are a few precautions:
• Do not immerse the units in water.
• Do not clean the units with abrasive or corrosive
materials. They may scratch the plastic parts and corrode
the electronic circuits.
• Do not subject the product to excessive force, shock,
dust, temperature, or humidity, which may result in
malfunctions, shorter lifespan, damaged batteries, and
damaged parts.
• Do not tamper with the units internal components. Doing
so will invalidate the warranty and may cause damage.
These units contain no user-serviceable parts.
• Use only fresh batteries. Do not mix new and old
batteries.
SPECIFICATIONS
Main Unit
TIME
12/24 hour display in hh: mm format
Date format: month-day or day-month format
Day of the week is selectable in five languages (English, Spanish,
French, German, Italian)
Time zone manual adjustment
Dual two-minute crescendo alarms with 8 minutes snooze
Programmable ice warning alarm (Channel 1)
WEATHER
Rainfall
Proposed operating range: 0 to 1999.9mm/0 to 78.74 inch
Rainfall resolution: 1mm (0.04 inch)
Proposed operating range: -5.0
°
C to +50.0
°
C/23.0
°
F to 122.0
°
F
Temperature resolution: 0.1
°
C/0.2
°
F
User-selectable (
°
F or
°
C) temperature display
LED backlight
Low battery indicator
Wall Mount or Desktop option
Remote Rain Gauge
Remote Rainfall Data
Proposed operating range: -5.0
°
C to +50.0
°
C/23.0
°
F to 122.0
°
F
RF transmission frequency: 433 MHz
RF transmission range: maximum 30 metres
Rainfall transmission cycle: approximately 183 seconds
Remote Temperature Sensor
Remote Temperature
Proposed operating range with alkaline batteries:
-20.0
°
C to + 70.0
°
C/-4.0
°
F to + 158
°
F
Proposed operating range with lithium batteries:
-38.8
°
C to + 70.0
°
C/-38.0
°
F to +158
°
F
Temperature resolution: 0.1
°
C/0.2
°
F
Low battery indicator
RF transmission frequency: 433 MHz
Maximum number of remote sensors: 3 (1 included)
RF transmission range: maximum 30 metres
Temperature transmission cycle: approximately 45 seconds
Power
Main unit: 2 AA size (UM-3) 1.5V batteries (not included)
Remote sensor: 2 AA size (UM-3) 1.5V batteries (not included)
Remote rain gauge: 2 AA size (UM-3) 1.5V batteries (not included)
Dimensions
Main unit: 69.8(L) x 137.9(H) x 25.9(D) mm
Remote sensor: 60.2(L) x 100(H) x 25.4(D) mm
Remote rain gauge: 164.8(L) x 175(H) x 119.9(D) mm
• The path between units is clear of obstacles. Shorten the
distance if necessary.
• Fresh batteries are installed correctly in both remote
temperature sensor and main unit.
• If there is no reception, please perform the following steps:
• Bring the main unit and remote temperature sensor close
together.
• Remove four (4) small screws from the back of the remote
temperature sensor with small Phillips screwdriver, and
open the battery compartment.
• Remove the batteries from the battery compartment and
reinstall them in the same manner. Remote sensor LED
indicator will flash showing transmission of the signal.
• Remove the batteries from the main unit and reinstall
them in the same manner.
• The remote temperature appearing on the main unit’s
display will show that transmission is being received
successfully.
If the main unit display line for the remote rain gauge
reading goes blank, press and hold
the front DOWN
( ) button for 2 seconds to begin a new signal search.
• If the signal still isn’t received, please make sure that:
• The remote rain gauge is in its proper location.
• The distance between main unit and remote rain gauge is
not over 30 metres.
• The path between units is clear of obstacles. Shorten the
distance if necessary.
• Fresh batteries are installed correctly in both remote rain
gauge and main unit.
TRANSMISSION COLLISION
Signals from the other household devices such as wireless
doorbells, home security systems, and entry control, may
interfere with this product or cause temporary reception
interruption. This is normal and will not affect the general
performance of the product. The transmission and reception
of the remote readings will resume once the interference
subsides.
CALENDAR AND CLOCK DISPLAY MODES
Date is displayed in month-date or date-month format. Each
press of the
MODE
button on the back panel will toggle the
clock modes between the time with seconds, time with the
day, time zone and a calendar.
MANUAL SETTINGS
CLOCK
• Press and hold
MODE
button for 3 seconds: the language
letters will flash.
• Press
UP
( ) or
DOWN
( ) to change flashing letters.
• After the first value is set, press
MODE
button again to
move to the next value
• Continue setting temperature in Celsius or Fahrenheit,
year, month, date, calendar format, 12 or 24 hour time
format, hour and minutes.
• Press
MODE
for the last time to return to the default
mode (time of day with seconds) after the last parameter
is set.
TIME ZONE
• Select Time Zone setting mode by pressing
MODE
button
until the word “
ZONE
” will appear to the left of time display
• Press and hold
MODE
button until flashing“
0:00
” digits
will appear prompting to set the desired time zone in
30 minutes intervals
W
S
W
