getconnected.honeywell.com
General Information
The TCPA1BS is a wireless keyfob that may be worn around the neck, on a wrist band or as an apparel clip that
may also be mounted to a desk. Pressing the keyfob button for at least 1 second and releasing it, sends a
signal to the panel.
Registration and Confi guration
1.
2. To start registration, press the keyfob button for 5 seconds.
Battery Replacement (see fi gure on fi rst page)
The TCPA1BS is powered by a long-life Lithium battery that may be replaced when a low battery is eventually
indicated by the control unit.
1. Remove 4 screws and lift off cover.
2. Using a small fl at-blade screwdriver remove old battery.
3. Insert new battery by placing new battery under the gold tab and then pressing down. Ensure the positive (+)
side of battery is face up after installation.
4. Align cover and attach with 4 screws.
NOTE: When replacing the battery, wait a minimum of 10 seconds prior to installing the new battery.
NOTE: Although water-resistant, please do not immerse in water at a depth below 10cm for more than 1
hour.
Specifi cations:
Unit
Dimensions:
9 mm diameter
LED
lights when unit transmits
Battery
3-Volt CR2032 Lithium
Operating Temperature
-10°C to +55°
CAUTION: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to battery manufacturer instructions and applicable regulations.
Wireless Panic Button
TCPA1BS
Installation instructions
English
https://international.mytotalconnectcomfort.com
>1.5m
WEB
PORTAL*
4
*https://international.mytotalconnectcomfort.com
