9
9
Collects the rainfall in one of its containers and self-empties once full
I
. Protective screen
Protects the rain gauge funnel from debris
BEFORE YOU BEGIN
•
We recommend using alkaline batteries for the remote rain gauge
and main unit when temperatures are above 32°F (0°C). We
recommend using lithium batteries for remote rain gauge when
temperatures are below 32°F (0°C).
•
Avoid using rechargeable batteries. (Rechargeable batteries
cannot maintain correct power requirements).
•
ALWAYS
install batteries into the
remote rain gauge
before
the
main unit.
•
Insert batteries before first use, matching the polarity in the
battery compartment
•
Remove protective plastic screen from LCD display (If any)
•
During an initial setup, place the main unit close to the remote
rain gauge
•
Important
: Only after reception is established (the remote rainfall
data will appear on the main unit’s display), you may position and
mount the remote rain gauge sensor within the effective
transmission range of 100 feet (30 meters) from the main unit
•
The remote rain gauge must be placed outdoors on the open
area, away from the walls, fences and trees and level.
•
It is important that excess precipitation can freely flow from the
remote rain gauge.
•
The main unit must be placed indoors.
NOTE:
1. Avoid pressing any buttons on the main unit
before the remote
10
rainfall is displayed.
2. The effective operating range may be influenced by the surrounding
building materials and how the receiver (main unit) and transmitter
(remote rain gauge) are positioned.
3. Place the remote rain gauge so that it faces the main unit (receiver),
minimizing obstructions such as doors, walls, and furniture.
NOTE: When the temperature falls below freezing, the batteries in
the remote rain gauge may have reduced voltage supply and a
shorter effective range. We recommend using lithium batteries at
temperatures of 32°F (0°C) and below.
We also recommend covering the remote rain gauge tightly with a plastic
during the winter time or move it indoors.
BATTERY INSTALLATION
REMOTE RAIN GAUGE
•
Unlock the funnel-shaped top on the rain gauge by turning both
knobs on the sides in an anti-clockwise direction
•
Remove the funnel-shaped top lifting it off the rain gauge bucket
•
Remove 7 small screws from the battery compartment cover
using a small Phillips screwdriver
•
Insert 2 “AA” size alkaline batteries (not included), matching the
polarities as shown in the battery compartment
•
Replace the battery compartment door and secure the screws
•
Insert the funnel-shaped top into the rain gauge bucket and
secure it into place by turning the knobs clockwise
RAIN GAUGE PLACEMENT TIPS
•
Make sure that the remote rain gauge is level – check if the ball
bearing inside the bucket is at the midpoint of the leveler
