2. Push the module onto the chassis until the locking tabs click.
3. Go to the next section
2.3
Connecting Components
l
l
l
Connecting optional annunciator cable
l
2.3.1
General wiring guidelines
l
Never run all three lines together in any application. For example, do not run input power, adapter
cable, and annunciator cable together in the same raceway.
l
If the redundant power supply and the annunciator cable use the same input power source, you can
route the power line and annunciator cable together. For example, if your application uses a Vdc
redundant power supply and the annunciator cable is connected to a Vdc input module, you can
route the power source line and the annunciator cable together, as shown below.
- 14 -
Chapter 2 - Installation
