4
TAM-401 Series Satellite Terminal Quick Start Guide
Charge the Terminal
If you have a TAM-442 Satellite Terminal, you can charge the
battery with the single mains charger accessory or from the
vehicle power supply. See the user manual for information on
the available charging accessories.
Either charging method takes at least 7 hours to fully charge
the battery. You can charge the terminal from a power source
ranging from 9.6 V to 30 V, limited to 2 A.
1
Connect the TAM-442 to either the single mains charger
or to the vehicle charging cable.
2
Charge for at least 7 hours to make sure you have a fully
charged battery. The Charging Status LED will turn green.
Note:
The TAM-442 terminal needs to be charged before
installation.
Charging Status LED
Description
Orange
Battery is charging.
Green
Charging is complete.
Red
Battery is not charging due to a fault
or it is outside charging temperature
range.
