Honeywell Thermostats
Crestron Home™ Driver
Base Model
:
T9
Device Type
:
Platform Extensions
Version
:
1.2.0
Notes & Recommendations
This driver will control a Honeywell T-series thermostat (examples include but are not
limited to T5, T6 Pro, T9, and T10). The thermostat will have to be paired with the
Honeywell Home app first. Please refer to the instruction manual for the thermostat
that you have for thermostat setup instructions. This driver talks to the thermostat with
the cloud so an active internet connection will be necessary. In addition, a (free)
Honeywell developer account will need to be registered in order to properly set up this
driver. A developer account is needed because of access limitations imposed by
Honeywell. The owner will also have to make available the thermostats for Crestron
control through a web browser (explained later). The driver will poll for feedback from
Honeywell’s server approximately every 5 minutes. This is a restriction set by
Honeywell.
System Requirements and dependencies
Versions of software used:
●
Crestron Home 3.013
●
Active internet connection to the processor
●
Honeywell developer account (
https://developer.honeywellhome.com/
)
●
Homeowner’s Honeywell Home credentials for authorizing thermostats
This driver comes with a 2-hour trial license. You can purchase a full license at (add
product link from the store)
For additional information on this driver please visit the FAQs section on our website
(Add product FAQ section link)
Visit us at