T7350 COMMERCIAL PROGRAMMABLE THERMOSTAT
63-2605—09
14
Use the Test Mode to check the thermostat configurations and
operation. To start the system test:
1.
Press
Schedule Day, Occupied
and
Not Occupied
simultaneously.
2.
The display gives the option to TEST.
a. To enter test mode, press up
▲
or down
▼
until the
display indicates IN TEST.
b. To cancel this option, ensure the display indicates
NO TEST.
3.
Press
Run Schedule.
NOTES:
—
To verify whether or not the system test is still
active, repeat the above process.
—
The system test times out after ten minutes with no
key pressed.
Save User Schedule (Info/Copy)
Performing this operation saves the current schedule (including
holidays) to memory, overwriting the old saved schedule:
1.
Press both
Info
and
Copy
.
2.
The display gives the option to SAV SHD.
a. To save the current schedule, press up
▲
or
down
▼
until the display indicates YES.
b. To cancel this option, ensure display indicates NO.
3.
Press
Run Schedule.
Get User Schedule (Info/Run)
Getting the user schedule restores the schedule (including
holidays) from saved memory, overwriting the schedule
currently in use:
1.
Press both
Run Schedule
and
Info
.
2.
The display gives the option to GET SHD.
a. To retrieve the saved schedule, press up
▲
or
down
▼
until the display indicates YES.
b. To cancel this option, ensure display indicates NO.
3.
Press
Run Schedule.