background image

T7079A,B SOLID STATE REMOTE TEMPERATURE CONTROLLERS

63-2572—04

2

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the 

TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or 

phone:

1.

Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).

2.

Honeywell Customer Care

1885 Douglas Drive North

Minneapolis, Minnesota 55422-4386

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9.

International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, 

Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

SPECIFICATIONS

Models:

T7079: On-off wall-mount control with one temperature input 

and one or two relay output stages. Differential range of 

1 to 30°F. Includes one sensor. See Table 1.

Table 1.  T7079 models.

Dimensions: 

See Fig. 1.

Fig. 1. Dimensions of T7079 in in. (mm).

Electrical Ratings:

Voltage Input: 24 Vac, 50/60 Hz (+10%, -15%), Class 2 

only

.

120/230 Vac, 50/60 Hz (+10%, -15%).

Power Consumption: 

See Table 2.

Table 2. Power consumption ratings.

Contact Ratings:

At 120 Vac: 1/2 hp, 9.8 FLA, 58.8 LRA.

At 230 Vac: 1/4 hp, 4.9 FLA, 29.4 LRA.

At 120/230 Vac: 125 VA pilot duty.

At 24 Vac (resistive): 8A.

Ambient Ratings:

Operating Temperature: -40

°

 to 140

°

F (-40

°

 to 60

°

C).

Storage Temperature: -40

°

 to 180

°

F (-40

°

 to 82

°

C).

Operating Humidity: 5% to 95% RH non-condensing.

Temperature Accuracy (at nominal voltage): 

In 77°F 

(25°C) ambient, nominal sensor value: ±2

°

F.

NOTE: Accuracy can vary based on deviation from nominal 

values of input voltage, operating ambient and 

sensor ambient.

Sensor: 

10k NTC, 400 ft maximum distance between sensor 

and electronic controller. See Table 3 for thermistor output.

Approvals:

Underwriters Laboratories, Inc.

Canadian Underwriters Laboratories.

CE.

Accessories:

107048 Heat Conduction Compound, 4 once.

107324A Bulb Holder, duct insertion.

121371A Copper Immersion Well.

121371E Stainless Steel Well.

32004800-001 10K NTC Sensor.

T7047C1090 Wall Mounted Sensor Case.

Voltage (in Vac) Setpoint Range in °F (°C)

24

120/230

-25 to 105

(-32 to 40)

100 to 240

(38 to 116)

T7079A1004

X

X

T7079A1012

X

X

T7079A1046

X

X

T7079A1053

X

X

T7079B1028

X

X

T7079B1036

X

X

T7079B1044

X

X

T7079B1051

X

X

STAGE1 STAGE2

POWER

2 (50)

2-7/16 (61)

1 (25)

2 (50)

4-1/2

(114)

7-3/16

(183)

2-7/16 (61)

M17560

Voltage

Hz

Nominal VA Maximum VA

24

50

5.6

6.2

60

5.5

6.1

120

50

7.7

8.5

60

5.6

6.2

230

50

5.0

6.1

60

2.9

4.7

Summary of Contents for T7079A









Reviews: