Page 1: ...FF until the next programme ON time When the indicator lamp is OFF pressing the CHANGE button switches the output ON until the next programme OFF time POWER FAILURE This unit has a built in battery to ensure correct operation after a mains power cut No action should be necessary following a power cut of up to 7 days Longer power cuts may require you to reprogramme the unit Honeywell Control System...
Page 2: ...rrent day s pro gramme into several days of the week if required 8 Move the AUTO SET selector to the AUTO position to complete setting the programme times REVIEWING AND CHANGING PROGRAMME TIMES To review change the ON OFF programme times move the AUTO SET selector to each of the ON OFF positions in turn Press the DAY button to select different days Any time can be adjusted by using the 1 1or El bu...
Page 3: ...ut our full range of Heating Products Central Heating Controls Honeywell Heating Controls Danfoss Heating Controls Radiator Valves Fernox Sentinel Magnaclean Warmup underfloor heating Water Heaters Hand Dryers ...
