Solaris 7980g User Guide
137
If
GS1 Code Expansion Off
is scanned, retail code expansion is disabled, and UPC-
E expansion is controlled by the
(page 116) setting. If the AIM ID
is enabled, the value will be the GS1-128 AIM ID, ]C1 (see
If
EAN8 to EAN13 Conversion
is scanned, all EAN8 bar codes are converted to
EAN13 format.
Default = GS1 Emulation Off
.
TCIF Linked Code 39 (TLC39)
This code is a composite code since it has a Code 39 linear component and a
MicroPDF417 stacked code component. All bar code readers are capable of read-
ing the Code 39 linear component. The MicroPDF417 component can only be
decoded if TLC39
On
is selected. The linear component may be decoded as Code
39 even if TLC39 is off.
Default = Off.
GS1-128 Emulation
GS1 DataBar Emulation
GS1 Code Expansion Off
EAN8 to EAN13 Conversion
* GS1 Emulation Off
On
* Off
Summary of Contents for Solaris 7980g
