K200-16-00
1
I56-2733-003
INSTALLATION AND
MAINTENANCE INSTRUCTIONS
IDP-Zone-6
Six Zone Interface Module
SPECIFICATIONS
Normal Operating Voltage:
15-32 VDC
Stand-By Current:
2 mA
Alarm Current:
40 mA (assumes all six
LEDs solid on)
Temperature Range:
32ºF to 120ºF ( 0ºC to 49ºC)
Humidity:
10 to 93% Non-condensing
Dimensions:
6.8˝ H x 5.8˝ W x 1.0˝ D
Accessories:
IDP-ACB Cabinet and chassis
Wire Gauge:
12-18 AWG
Max. IDC Wiring Resistance:
25 ohms
External Supply Voltage
DC Voltage:
18-28 volts power limited
Ripple Voltage:
0.1 volts RMS maximum
Current:
90mA per module
IDC:
Supervised and power limited
Compatible Two-wire System Sensor Smoke Detectors for use with IDP-Zone-6
DET.
DETECTOR
MODEL
DET. ID
MANUFACTURER
BASE MODEL
MAX DET.
1151
A
SYSTEM SENSOR
B110LP, B401
20
1451
A
SYSTEM SENSOR
B401, B401B
20
1451DH
A
SYSTEM SENSOR
DH400
20
2151
A
SYSTEM SENSOR
B110LP, B401
20
2451
A
SYSTEM SENSOR
DH400, B401B, B401
20
2451TH
A
SYSTEM SENSOR
B401, B401B
20
5451
A
SYSTEM SENSOR
B401
20
1100
A
SYSTEM SENSOR
N/A
20
1400
A
SYSTEM SENSOR
N/A
20
** 2100AT
A
SYSTEM SENSOR
N/A
20
2100B
A
SYSTEM SENSOR
N/A
20
2100D
A
SYSTEM SENSOR
N/A
20
2100S
A
SYSTEM SENSOR
N/A
20
2100TB
A
SYSTEM SENSOR
N/A
20
2100TD
A
SYSTEM SENSOR
N/A
20
2100TS
A
SYSTEM SENSOR
N/A
20
2300B
A
SYSTEM SENSOR
N/A
20
2300TB
A
SYSTEM SENSOR
N/A
20
2400
A
SYSTEM SENSOR
N/A
20
2400TH
A
SYSTEM SENSOR
N/A
20
* 2W-B
A
SYSTEM SENSOR
N/A
20
* 2W-TB
A
SYSTEM SENSOR
N/A
20
DH100LP
A
SYSTEM SENSOR
N/A
20
* Class B, Style B only
** No Accessory will be supported by 2100AT
BEFORE INSTALLING
If the modules will be installed in an existing operational
system, inform the operator and local authority that the
system will be temporarily out of service. Disconnect the
power to the control panel before installing the modules.
This system contains static sensitive components. Always
ground yourself with a proper wrist strap before handling
any circuits so that static charges are removed from the
body. The module housing should also be grounded.
NOTICE: This manual should be left with the owner/user
of this equipment.
GENERAL DESCRIPTION
The IDP-Zone-6 Six Zone Interface Module is intended
for use in an intelligent alarm system. Each module pro-
vides an interface between the intelligent alarm system
and a conventional alarm system loop. A common SLC
input is used for all modules, and the initiating device
loops share a common supervisory supply and ground.
Otherwise, each monitor operates independently from the
others. Each module has its own unique address.
A pair of rotary code switches is used to set the address
of the first module from 01 to 94. The remaining modules
are automatically assigned to the next five higher ad-
dresses. Provisions are included for disabling a maximum
of two unused modules to release the addresses to be
used elsewhere. Each module also has panel controlled
bicolor LED indicators. The panel can cause the LEDs to
blink, latch on, or latch off.