background image

Issue 3 07/2009 
3001M5006_3 
H_MAN0639
© 2009 Honeywell Analytics

12519

Contact Honeywell Analytics:

  

Find out more

www.honeywellanalytics.com

Europe, Middle East, Africa, India

Life Safety Distribution AG
Weiherallee 11a
CH-8610 Uster
Switzerland
Tel: +41 (0)44 943 4300
Fax: +41 (0)44 943 4398
[email protected]

Americas

Honeywell Analytics Inc. 
405 Barclay Blvd.
Lincolnshire, IL 60069
USA
Tel: +1 847 955 8200 
Toll free: +1 800 538 0363 
Fax: +1 847 955 8210
[email protected]

www.honeywell.com

Technical Services

EMEAI: [email protected]
US:       [email protected]
AP:       [email protected]

Asia Pacific 

Honeywell Analytics Asia Pacific 
#508, Kolon Science Valley (I) 
187-10 Guro-Dong, Guro-Gu 
Seoul, 152-050 
Korea 
Tel: +82 (0)2 2025 0300
Fax: +82 (0)2 2025 0329
[email protected]

Please Note:

While every effort has been made to ensure  
accuracy in this publication, no responsibility  
can be accepted for errors or omissions.  
Data may change, as well as legislation, and you  
are strongly advised to obtain copies of the most 
recently issued regulations, standards, and guidelines.
This publication is not intended to form the  
basis of a contract.

Summary of Contents for Sensepoint XCD







Reviews: