manualshive.com logo in svg

Honeywell SD500-PSDA, Installation Instructions, Page: 2 / 2

Share
Download
Honeywell SD500-PSDA Installation Instructions Download Page 2

I56-3632-003 / 151177

ECN: 2017-4407

2

Silent Knight

®

, Farenhyt

®

, and Honeywell

®

 

are registered trademarks of Honeywell International, Inc.

Figure 2: Mounting the Fire Pull Station

Installing The SD500-LK

The SD500-LK is used to convert the SD500-PS 
(single action pull station) to a SD500-PSDA 
(Dual action pull station. Refer to Figure 3 to 
install the SD500-LK Dual Action Conversion 
Kit.

Figure 3: SD500-LK Installation

PS-SMBB

Mounting

Holes

Single Gang
Electrical
Switch Box

To meet ADA requirements the

access and no more than 54" from

pull station must be mounted 48"
from the floor for wheelchair forward 

the floor for wheelchair side access

Summary of Contents for SD500-PSDA

Page 1: ...P approximately every 30 seconds Specifications Operation To activate the fire pull station 1 Grab the top of the pull station where it is labeled PULL 2 Pull the cover plate out and down To reset the pull station 1 Insert key into the lock 2 Turn the key clockwise 3 Close the cover plate 4 Turn the key counter clockwise Wiring to the SD500 PS PSDA Wire the SD500 PS as shown in Figure 1 Figure 1 F...

Page 2: ...to convert the SD500 PS single action pull station to a SD500 PSDA Dual action pull station Refer to Figure 3 to install the SD500 LK Dual Action Conversion Kit Figure 3 SD500 LK Installation PS SMBB Mounting Holes Single Gang Electrical Switch Box To meet ADA requirements the access and no more than 54 from pull station must be mounted 48 from the floor for wheelchair forward the floor for wheelc...

Reviews:

No comments