Honeywell ScanPal EDA51 User Manual Download

Page: 12 / 100

EDA51 User Guide

EDA51 Model Overview

Note:

To learn more, see

Appendix A

Specifications

beginning on page 81.

Available Feature

EDA51-0

EDA51-1

Android operating system*

1.8 GHz Qualcomm Snapdragon™ SDM450 octa-core processor

Memory options are dependent on model and scan engine type.

•

2GB DDR4 RAM, 16 GB flash memory

•

2GB DDR4 RAM, 32 GB flash memory

•

3GB DDR4 RAM, 32 GB flash memory

•

4GB DDR4 RAM, 64 GB flash memory

Choice of Honeywell high performance 2D imager with ergonomic
Scan buttons

WLAN IEEE 802.11 a/b/g/n/ac radio; Wi-Fi certified

Bluetooth™ V4.2 and Bluetooth Low Energy (BLE) technology
support

NFC technology for short-range data exchange

Wireless Wide Area Network (WWAN) radio for high speed data and
quality voice support across all network technologies

Integrated GPS receiver; GPS Supported Protocols: Simultaneous
GNSS Receiver Support for GPS, GLONASS, Galileo and Beidou

Mid-tier rugged specifications with IP64 sealing

Customer-accessible microSD™ slot for removable memory cards
up to 128 GB (SDXC/SDHC/SDIO-compliant)

Value-added software components supporting specialized imaging
and OCR functions

13-megapixel color camera, 1080P video with image stabilization and
advanced software features for enhanced exposure control

Large, high definition, bright color, outdoor-readable display with
responsive multi-touch capacitive touch panel**

Integrated ambient light sensor, proximity sensor, and
accelerometer

* For information on supported Android OS versions, see the EDA51 Data Sheet, available at

sps.honeywell.com

** Use of a screen protector may have small effect on the capacitive touch panel performance.

Summary of Contents for ScanPal EDA51





































































































Search results

Summary of Contents for ScanPal EDA51

Reviews:

Related manuals for ScanPal EDA51

Brands by name

Popular brands

Honeywell ScanPal EDA51, User Manual

Search results

Summary of Contents for ScanPal EDA51

Reviews:

Related manuals for ScanPal EDA51

Brands by name

Popular brands