manualshive.com logo in svg

Honeywell ScanPal EDA51, User Manual

Share
Download
Honeywell ScanPal EDA51 User Manual Download Page 91

APPENDIX

A

EDA51 User Guide

81

SPECIFICATIONS

Computer Agency Information

EDA51 mobile computers meet or exceed the requirements of all applicable 
standards organizations for safe operation. The best way to ensure safe operation 
is to use the mobile computer according to the agency guidelines on the product 
regulatory sheet, quick start guide and in this user guide. Read all guidelines 
before using your computer. 

Product documentation is available for download from 

sps.honeywell.com

. 

Public certificates are available for download from 

honeywell.com/PSStechnicalsupport

.

Physical and Environmental Specifications

1. Go to 

sps.honeywell.com

.

2. Type EDA51 in the Search box and then press 

Enter

.

3. Select the 

Products

 tab.

4. Click the red arrow under the EDA51

 computer 

description.

5. Select one of the following:

•

Specifications

View System Architecture, WWAN Connectivity, Mechanical, and 
Environmental specifications.

•

Documents

Download the Data Sheet, Accessory Guide, Quick Start Guide, User Guide, 
Regulatory Information, Battery Information and other product 
documentation.

Summary of Contents for ScanPal EDA51





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands