7
4-3-2. Zoom In/Out
Twist the joystick count clockwise to zoom out, clockwise to zoom in.
Zoom speed is proportional to rotation of the joystick.
4-3-3. Manual Focus
Press the key “FAR” or “NEAR” to manually focus. When the zoom handle of the joystick is
twisted slightly, the camera will return to Auto Focus mode.
4-3-4. Manual Iris
Press the key “OPEN” or “CLOSE” to manually open or close the iris. Move the joystick
slightly to return to Auto Iris Mode.
4-3-5. Setting Zoom Camera
-
Pressing the MENU key and then SETUP MENU is displayed on the screen.
-
Select item of SETUP MENU using up/down joystick.
-
Move joystick Left/Right to change value of selected item.
-
Press the MENU key again. SETUP MENU is disappeared,
“SAVE?” or “QUIT?” is displayed at center of screen.
If there is no change of adjustment state of Camera,
“QUIT?” is showed, else “ SAVE?” is showed.
①
“QUIT?” : quit SETUP MENU without saving changed value.
②
“SAVE?” : quit SETUP MENU with saving changed value.
4-3-6. Setting Preset, Tour, Pattern, Auto Scan
Set Preset, Tour, Pattern, Auto Scan by pressing MENU and selecting item of menu.
Æ
More detail refer to the manual of ScanDome II.
*Setting Preset of Zoom camera(HDC-655, GC-655, GC-755)
-Zoom in/out to watch desired view.
-Press No and HOME to store preset view.
4-3-7. Call Preset, Tour, Pattern, Auto Scan
To call the number of the desired Preset, Tour, Pattern, Auto Scan, enter the number and
press key “PST”, “TOUR”, “PTRN”, “SCAN”.
4-3-8. Global
It is possible to cause all cameras to move to preset positions simultaneously.
Enter desired global number and press key”GLB”.
.
4-3-9. Relay ON/OFF
ON: Press 111~114 and “ENT” to turn on relay of in the ScanDome.
OFF: Press 111~114 and “CLR” to turn off relay of in the ScanDome.
Summary of Contents for Scan Dome ll HTX-2500
Page 10: ...10 ...
