S7999B SYSTEM DISPLAY
47
65-0283—2
DISPLAY SETUP AND DIAGNOSTICS
The following pages apply to display setup and diagnostics for
the S7999B.
Setup
The Setup button on the Home page is selected to go to these
pages. The Setup screen (see Fig. 94) is displayed first. It
allows for some S7999B device settings. The Advanced
Setup button permits the user to run some diagnostic
functions for the S7999B and to set advanced features for
run-time operation. See the Advanced Setup section starting
with Fig. 111 for these features.
Fig. 94. S7999B setup.
In System S7999B mode the initial setup page is displayed, as
shown in Fig. 95.
Fig. 95. S7999B setup—initial display.
No “CONTROLLERS,” “BURNER SYSTEMS,” or “PROFILE
CURVES” buttons exist on this setup page. Instead a “KEY
VARIABLES” button replaces them.
If Contrast or Volume are changed, Fig. 96 displays to allow
saving these changes to flash.
Fig. 96. Setup settings changed.
When the user wants to clean the touch screen, the “CLEAN
SCREEN” button is selected to freeze touch input temporarily for
30 seconds to allow the user to clean the screen. (See Fig. 97.)
Fig. 97. Clean screen setup.
