Honeywell S437A Product Data Download Page 1

PRODUCT DATA

60-2186—2

S437A,B, S637A

Sail Switches

APPLICATION

The S437 and S637 Sail Switches respond to the air velocity 

in heating or warm air ducts, such as used in farm crop dryers. 

The switch completes a 24 V or line voltage burner control 

circuit only when the blower or fan has produced a 

predetermined air velocity.

FEATURES

• Micro Switch snap switch is operated by metal sail 

inserted in an air stream. (S437 switch is spst, S637 

switch is spdt.)

• S637 has a set of normally closed contacts which can 

be used to energize a signal or warming circuit when 

the velocity drops off.

• Sail can be trimmed to one-half the original size to 

double the velocity required to close the snap switch 

contacts.

• Switch differential can be manually adjusted by 

turning a knurled knob on the snap switch.

• A conduit knockout is located on each end of the case 

for wiring convenience.

SPECIFICATIONS

Mounting Position:

 Velocity characteristics listed apply when 

standard size sail is inserted in a horizontal air stream with 

the sail pivot in a vertical position. Vertical mounting with air 

movement upward is satisfactory; however, characteristics 

will change. Device cannot be vertically mounted with 

downward air movement.

Mounting Means:

 Case screw-mounts to duct wall with sail 

inserted through wall into air stream.

Mounting Dimensions:

 Refer to Fig 1.

Sail Size: 

Standard - 1 x 3 in. (25 x 76 mm).

Large - 1 1/2 x 4 in. (38 x 102 mm).

Contents

Application ........................................................................

1

Features ...........................................................................

1

Specifications ...................................................................

1

Ordering Information  ........................................................

2

Installation ........................................................................

3

Wiring ...............................................................................

3

Checkout ..........................................................................

3

Summary of Contents for S437A

Page 1: ...required to close the snap switch contacts Switch differential can be manually adjusted by turning a knurled knob on the snap switch A conduit knockout is located on each end of the case for wiring convenience SPECIFICATIONS Mounting Position Velocity characteristics listed apply when standard size sail is inserted in a horizontal air stream with the sail pivot in a vertical position Vertical moun...

Page 2: ... 5 11 59 Guide No MFHX S437B File No MP2168 Vo 2 dated 5 11 59 Guide No MFHX2 Component Recognized Canadian Standards Association Certification Listed S File No LR95329 Class 481302 Fig 1 S437 Dimensions in in mm in Brackets MODEL NO INCLUDES CASE AND COVER SWITCHING ACTION ON INCREASING VELOCITY SWITCHING ACTION ON DECREASING VELOCITY SWITCH DIFFERENTIAL S437A YES Spst Normally open contacts clos...

Page 3: ...crews WIRING Disconnect power supply before making wiring connections to avoid possible electrical shock or equipment damage All wiring must agree with local codes and ordinances Wire the sail switch in series with the load to act as an air velocity limit switch Fig 2 S437 Schematic and Typical Connections Fig 3 S637 Schematic and Typical Connections Set Differential The knurled wheel at the base ...

Page 4: ...tered Trademark 2007 Honeywell International Inc 60 2186 2 J I Rev 10 07 By using this Honeywell literature you agree that Honeywell will have no liability for any damages arising out of your use or modification to the literature You will defend and indemnify Honeywell its affiliates and subsidiaries from and against any liability cost or damages including attorneys fees arising out of or resultin...

Reviews: