10
Function
Description
Press the
s
or
t
button to
Setting
1
select the type of system you
have in your home
0 Heating & cooling:
Gas, oil or electric heating with
central air conditioning.
1 Heat pump:
Outside compressor provides both heating
and cooling without backup or auxiliary heat.
2 Heating only:
Gas, oil or electric heating without central
air conditioning.
3 Heating only with fan:
Gas, oil or electric heating
without central air conditioning. (Use this setting if you
could turn the fan on and off with a fan switch on your
old thermostat.)
4 Cool only:
Central air conditioning only.
5 Heat pump:
Outside compressor provides both heating
and cooling with backup or auxiliary heating.
6 Heat/Cool Multiple Stages:
Two heat stages (wires on
W and W2), two cooling stages (wires on Y and Y2).
7 Heat/Cool Multiple Stages:
Two heat stages (wires on
W and W2), one cooling stage (wire on Y).
8 Heat/Cool Multiple Stages:
One heat stage (wire on
W), two cooling stages (wires on Y and Y2).
2
select whether your
changeover valve is used in
heating or cooling
0 Cooling changeover valve:
Use this setting if you
connected a wire labeled “O” to the O/B W wire terminal.
1 Heating changeover valve:
Use this setting if you
connected a wire labeled “B” to the O/B W wire terminal.
MCR33377
Function
Setting
MCR32600
Done
Next
Advanced Installation
Enter System Setup
To enter system setup, press and hold
both the
s
and
FAN
buttons until the
display changes (approximately 5
seconds).
Changing Settings
1. Press the
s
or
t
button to change
the setting.
2. Press
NEXT
to advance to the next
function.
3. Press
DONE
to exit and save settings.
