Quick Installation Guide
12
Follow the procedure below to personalize and
configure the thermostat according to the heating/
cooling system.
1)
Press the
Up
and
Down
buttons simultaneously
(for three seconds) until the display appears as
shown below. See table on the next page.
2)
Press the
Up
or
Down
button to change the
option.
3)
Press the
Up
and
Down
buttons simultaneously
for one second to advance to the next function.
4)
When the last function is displayed, press the
Up
and
Down
buttons to save any changes and exit
the menu.
NOTE
: If you do not press any button for 60 seconds while you are
in the setup menu, the thermostat automatically saves any changes
made and exits the menu. At any time you can save the changes
and exit by pressing the
Run
button.
v
System Setup
12.
Function
number
Option
number
69-2380ES-01 (RTH2510 7-day QIG) ENG USA.fm Page 12 Tuesday, October 20, 2009 10:16 AM