manualshive.com logo in svg

Honeywell RP2B, User Manual, Page: 26 / 70

Share
Download
Honeywell RP2B User Manual Download Page 26

18

RP2/RP4 User Guide

7. Change (or confirm) the 

USB Mode

 parameter setting. Click on the 

New Value

 

column dropdown arrow to display the list of possible settings.

8. Ensure that the 

Include

 column checkbox is selected for the new value, and 

click the 

Send

 button to send this change to the printer.

DPL Input Mode

1. Open the NETira CT Printer Configuration Utility Tool and click on 

Tools - 

Query Printer Configuration 

(or press CTRL-q) to query the printer.

2. Go to 

Tools - Set Input Mode

. 

3. Select the desired printer language from the dropdown. Click 

Set

 and 

Done

.

4. Click the 

Send

 button to send this change to the printer.

Allow 30 seconds for the printer to reset.

Note:

The NETira CT Configuration Utility can only communicate with the printer using the 
DPL printer language input mode. Once the printer has been set to use an input 
mode other than DPL, the printer’s input mode must be changed back to Auto or DPL 
when you need to communicate with NETira CT.

Summary of Contents for RP2B







































































Reviews:

No comments