Honeywell RMA 3000, User Manual

Page: 35 / 54

Release 1 34-ST-25-19 RMA 3000 Remote Meter Assemblies User Manual 27
6/04
51452507, Revision B
DECLARATION OF CONFORMITY
ATEX 0344
We declare under our sole responsibility that the following products,
RMA 3000 Remote Meter Assemblies
to which this declaration relates, are in conformity with the protection requirements of Council Directive: 94/9/EC
(ATEX Directive) on the approximation of the laws of the Member States concerning equipment and protective
systems intended for use in potentially explosive atmospheres, and 89/336/EEC (EMC Directive) as amended by
92/31/EEC and 93/68/EEC on the approximation of the laws of the Member States relating to Electromagnetic
Compatibility.
The models covered by this Declaration and evidence of conformity with the ATEX Directive are shown on the
attached list. Conformity to the ATEX Directive is accordance with the following European standards.
EN 50014-1997 Electrical Apparatus for Potentially Explosive Atmospheres - General Requirements
EN 50018-2000 Electrical Apparatus for Potentially Explosive Atmospheres - Flameproof Enclosure “d”
EN 50020-1994 Electrical Apparatus for Potentially Explosive Atmospheres - Intrinsic Safety "i"
EN 50284-1999 Special Requirements for Construction, Test and Marking of Electrical Apparatus of
Equipment Group II, Category 1 G
EC Type Examination Certificates Production Quality Assurance Notification
Notified
Bodies:
LCIE – Groupe Bureau Veritas – 0081
33, Avenue du Général Leclerc
92260 Fontenay-aux-Roses
France
KEMA Quality B. V. – 0344
Utrechtseweg 310
6812 AR Arnhem
The Netherlands
Certificate Protection Description
LCIE 02 ATEX 6178X
EEx ia IIC, T5
Models RMA300ME, RMA300SM, Remote Meter
Assemblies
LCIE 02 ATEX 6177
EEx d IIC, T6
Models RMA300DM, RMA300SM & RMA300ME,
Remote Meter Assemblies
Manufacturing
Locations :
Honeywell Industrial Solutions
Industrial Solutions
2500 West Union Hills Drive
Phoenix, Arizona 85027 USA
The authorized signatory to this declaration, on behalf of the manufacturer, and the Responsible Person is identified
below.
Honeywell International Inc.
Industrial Measurement & Control
1100 Virginia Drive
Fort Washington, PA 19034 USA Frederick M. Kent
Standards & Approvals Engineer,
(ATEX Authorized Person)
Issue Date: 18 July 2003