Owner’s Guide
10
To place the thermostat in Manual mode, press the
Mode
button until
Man
appears on the screen. In this mode, any
modification to the temperature setpoint must be done
manually. To set the temperature, press the
Up
or
Down
button. The default setting is 70°F (21.0°C).
To place the thermostat in Away mode, press the
Mode
button
until
Away
appears on the screen. This mode is a quick way to
lower the temperature to a predetermined setting before you go
away for an extended length of time. The temperature is 59°F
(15.0°C) by default and can be modified using the setup menu
(see page 11).
To disable heating, press the
Mode
button until
Standby
appears on the screen. In this mode, the setpoint temperature
cannot be displayed or modified. For frost protection, heating
will turn on only to prevent the room temperature from dropping
below 41°F (5°C).
Manual (Man) mode
Away mode
Standby mode
69-2613ES-01.book Page 10 Thursday, November 10, 2011 11:38 AM
