9
www.raesystems.com
Turning NeutronRAE II On and Off
Turning NeutronRAE II On
Press and hold the MODE button for 3 seconds. As
NeutronRAE II starts up, the following occur:
1. A long beep sounds (if the buzzer is set to On), and
unit information and the current firmware version are
displayed. The LEDs and vibrator undergo a self-test.
2. Unit self-check. The time and battery status are
displayed:
During the 20-second self-check, the detector checks
that the gamma and neutron sensors are functioning
properly. If so, the messages “Gamma sensor OK!”
and
“Neutron sensor OK!” are displayed.
