BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
30
EN1B-0198GE51 R1004B
C A U T I O N :
Using unallowed IP-Addresses could cause
interference on the network.
Please contact your network administrator to
retrieve a unique IP-Address. If you want to con-
nect the BNA to a customer network, make sure to
get in touch with the customers IT manager to
retrieve this IP-Address information.
dc
Download configuration
Definition of FTP server, path to
firmware and user account on FTP
server. This is necessary for loading the
application firmware into the BNA
device.
load
Load executable from FTP server
This command finally loads the
application firmware (executable) into
the BNA device. After successful down-
load, the application firmware is moved
into the Flash memory.
This is the minimum command sequence for setting
up a BNA device.
After that the application firmware can be invoked
by entering the command
run
or by pushing the
Reset button. When the Reset button is pushed, the
BNA Bootloader behaves as depicted in
Figure 6-1
on
Page 24
.
