Honeywell Prestige 2.0, System Installation Manual

Page: 8 / 28

System Installation Guide
8
69-2490—05
Setup Installer options (ISU) - continued
7
TIP
: You can use the thermostat USB port to download all system configuration and installer options, including your company
name and contact information. You can upload this data to each thermostat you install, to save time.
1000 Language B
1010 Residential/Commercial B
1020 Zone Number B
1030 Device Name B
1030 Device Name on Home Screen C
1040 Programmable/Non-programmable B
1050 Fahrenheit/Celsius B
1060 Outdoor Air Sensor B
2000 Heating System Type B
2010 Heating Equipment Type B
2020-2100 Heat Stages B
2050 Geothermal Forced Air System B
2060 Reversing Valve O/B B
2070-2090 Cool/Compressor Stages B
2110 Fan Operation in Heat B
2120, 2180 Backup Heat Type B
2130, 2170 Backup Heat Stages B
2150, 2200 Backup Heat Operation B
2160, 2210 Backup Heat Fan Operation B
2190 External Fossil Fuel Kit B
2220 A-L/A Terminal Setup C
3000 Manual/Auto Changeover B
3000 Auto Changeover Deadband B
3010 Temperature Control Options B
3020 Finish With High Cool Stage B
3021 Finish With High Heat Stage B
3030 Staging Control - Cool Differentials B
3040-3060 Staging Control - Heat Differentials B
3080, 3090 Staging Control - Backup Heat Differentials B
3110 Backup Heat Upstage Timer B
3120 Outdoor Compressor Lockout B
3120 Outdoor Backup Heat Lockout B
3130, 3150 Heat Cycles Per Hour B
3140 Cool Cycles Per Hour B
3160 Backup Heat Cycles Per Hour B
3170-3190 Cooling Derivative, Integral, Throttling range C
3200-3220 Heating Derivative, Integral, Throttling range C
3240 Minimum Compressor Off Time B
3260 Extended Fan Run Time in Cool B
3260 Extended Fan Run Time in Heat B
4000 Number of Scheduled Periods B
4010 Pre-occupancy Purge Duration C
4020 Override: Standard or Initiate Occupancy C
4030 Override Duration C
4050 Minimum Recovery Settings - Heat C
4060 Maximum Recovery Settings - Heat C
4070 Minimum Recovery Settings - Cool C
4080 Maximum Recovery Settings - Cool C
4090 Adaptive Intelligent Recovery R
4100 Minimum Cool Setpoint B
4100 Maximum Heat Setpoint B
4110 Keypad Lockout B
4120 Entry/Exit Remote -
Home/Occupied Cool Setpoint
B
4120 Entry/Exit Remote -
Home/Occupied Heat Setpoint
B
4130 Entry/Exit Remote -
Away/Unoccupied Cool Setpoint
B
4130 Entry/Exit Remote -
Away/Unoccupied Heat Setpoint
B
4140 Entry/Exit Remote -
Vacation/Holiday Cool Setpoint
B
4140 Entry/Exit Remote -
Vacation/Holiday Heat Setpoint
B
5000 Select Wired Sensors B
5010 Indoor Temperature Sensor Name B
5020 Terminals Wired to Indoor Sensor B
5030 Indoor Temperature Sensor Type B
5040 Indoor Sensors Used for Temperature Control B
5050 Terminals Wired to Outdoor Sensor B
5070 Terminals Wired to Return Air Sensor B
5080 Return Air Sensor Type B
ISU Function ISU Function
Thermostat functions
marked in gray below
require an EIM (see page 3). R : Residential C : Commercial B : Both
Create Setup:
Press
CREATE SETUP
to set all system settings one
by one.
View/Edit Current Setup:
Press
VIEW/EDIT CURRENT SETUP
to
select a specific function and make quick changes.
Set Up Diagnostics: Press SET UP DIAGNOSTICS to setup and test
Delta T diagnostics.
Installer Test: Press INSTALLER TEST to quickly determine if the
heat, cool, fan and thermostat are operating properly. Minimum off
timers are ignored during the test.
Data Logs: Press DATA LOGS to view the Alerts Log and User
Interactions Log.
Wireless Device Manager: Press WIRELESS DEVICE MANAGER
to add or remove wireless accessories.
Advanced Options: Press ADVANCED OPTIONS to setup the
thermostat using a USB device or to restore the thermostat to the
factory default settings.