manualshive.com logo in svg

Honeywell PFA 700, Technical Information, Page: 24 / 28

Share
Download
Honeywell PFA 700 Technical Information Download Page 24

PFA, BGT · Edition 03.11l

24

Accessories

7 Accessories

7 .1 PROFIBUS plug connector

To replace existing PROFIBUS plug connectors, if a new 

PFA 700 is operated in an old module subrack with the 
Order No. 8 440 228 3, to improve EMC. 
With shielding capacitor, 
Order No.: 74960621
CD with device master data files for PFA PROFIBUS DP, 
Order No. 74960460, or at www.docuthek.com

7 .2 Opto-adapter and BCSoft

Opto-adapter including BCSoft CD-ROM, 
Order No.: 74960437.

The current software can be downloaded from our In-

ternet site at 
www.docuthek.com. To do so, you need to register in 
the DOCUTHEK.

7 .3 “Changed parameters” stickers

D-49018 Osnabrück, Germany

Achtung, geänderte Parameter!

Die Angaben auf dem Typenschild 

gelten nicht mehr in vollem Umfang.

Aktuelle Parameter direkt auslesen.

Important, changed parameters!

The details on the type label are no 

longer completely accurate. Read the 

current parameters direct from the 

unit.

Attention, paramètres modifiés !

Les informations figurant sur la plaque 

signalétique ne sont plus valables 

dans leur intégralité. Veuillez vous 

référer directement aux paramètres 

actualisés.

Affix on the PFA if parameters set at the factory have 

been changed.

100 pcs, Order No.: 74921492.

Summary of Contents for PFA 700





























Reviews:

No comments