manualshive.com logo in svg

Honeywell PD45, User Manual, Page: 17 / 94

Share
Download
Honeywell PD45 User Manual Download Page 17

PD45 User Guide

7

Communications Wizard

Calibration Wizard

Printer Command Languages and Simulator Support 
Options 

A printer command language is a set of instructions that controls printer functions:

•

Configure the printer

•

Return the status of the printer

•

Control peripheral devices

•

Format a label or receipt for printing

The printer supports these command languages and language simulator support 
options:

•

Autosense

 

•

Direct Protocol

•

Fingerprint

•

IPL

•

ZSim

•

DPL

•

Smart Printing

Wizard

Description

Line Analyzer

Logs all incoming data on all communications channels and saves the 
data to a log file. For advanced users.

Wizard

Description

Media Calibrates 

all 

media sensors and shows current print settings.

Sensor

Calibrates the sensor used with the label dispenser. Available when the 
sensor is installed.

Date and Time

Calibrates the date and time.

Screen

Calibrates the touch screen.

Summary of Contents for PD45































































































Reviews:

No comments