manualshive.com logo in svg

Honeywell PD45, User Manual, Page: 18 / 94

Share
Download
Honeywell PD45 User Manual Download Page 18

8

PD45 User Guide

 Autosense

Autosense allows the printer to automatically sense from label to label, the 
incoming data stream and its language, and print each label accordingly.

Note:

Autosense is the default printer configuration and does not support an IPL data 
stream.

Direct Protocol

Direct Protocol (DP) uses a more intuitive English-like syntax. Direct Protocol lets 
you combine predefined layouts and variable data to create labels, tickets, and 
tags. If you are using barcode software, select Direct Protocol as your printer 
command language. 

Fingerprint

Fingerprint is a BASIC-inspired general purpose printer language. Use Fingerprint 
to design custom label formats and write printer application software. If you plan 
to run Smart Printing applications directly on the printer, without connecting to a 
PC, select Fingerprint as your printer command language.

IPL

IPL is a host-based printer command language. Use IPL to design, modify, and 
download label formats, write printer application software, and configure the 
printer. If you are sending IPL label files to the printer, select IPL as your printer 
command language.

Note:

IPL can be supported on 200dpi and 300dpi printers only.

ZSim

The ZSim (Zebra Printer Language Simulator) interprets Zebra™ programs (ZPL II 
or later) without requiring any host programming changes. If you are sending ZPL 
label files to the printer, select ZSim as your printer command language.

DPL

The DPL command language interprets Datamax™ data streams without requiring 
any host programming changes. If you are sending DPL label files to the printer, 
select DPL as your printer command language.

Summary of Contents for PD45































































































Reviews:

No comments