Honeywell Notifier FirstCommand Series, Instruction Manual

Page: 58 / 96

58 Notifier FirstCommand Series Manual — P/N LS10001-001NF-E:H 1/8/2018
Programming Main Menu - Utilities
3.3.1 Message Recording
The NFC allows up to 14 recorded messages. These custom messages can be recorded using the local microphone, external audio input,
or via USB port using a third party audio editing program. Clicking the
Enable Recording will put the system in message record mode.
Refer to Section 3.5. When the button has been clicked, the background screen will turn dark red, giving a visual cue that the system is
ready to record. After all messages have been successfully recorded, message recording must then be disabled. Simply click the
Disable
Recording button.
3.3.2 USB File Options
The NFC system allows software files to be saved, shared, and transferred via the computer’s USB port. The program file must be named
CONFIG.TXT.
When saving the program file to USB, it is vital that no other files with the same name exist on the drive. The existing
file will be completely overwritten. Only files named CONFIG.TXT can be recalled from a USB drive. The NFC system will verify that
the file is compatible.
After a Save or Recall has been performed, the screen will show “Processing USB Request”. Once this is complete, the screen will show
either a success message in green or a failure message in red. If a failure message appears, correct the issue and try again.
m
s
g
re
c
o
rd
.j
p
g
m
s
g
d
is
a
b
le
.j
p
g
u
s
b
.j
p
g