Honeywell NOTIFIER APS2-6R/E, Instruction Manual

Page: 10 / 32

10 APS2-6R/E Instruction Manual — P/N 53232:B 2/26/2014
Overview Board Layout
Removal of the shunt from JP4 separates the AC loss trouble from other existing troubles and works with the TB4
relay contacts for immediate trouble annunciation.
 Diagnostic LEDs
LED1- Green- Indicates presence of AC power
LED2- Yellow- Illuminates when an AC or battery trouble exists
2.4 Board Layout
The figures below identify the layout of the APS2-6R power supply:
Hardware Kit
A hardware kit is included for use in assembling and mounting the APS2-6R. It consists of the following items:
Quantity Description Part No.
2 #6-32 x 1.25 in. (10 mm) long,.25
in. (2mm) hex standoff
42026
2 #6-32 self-tapping screw 38164
1 Trouble supervision cable 71033
Table 2.1 Hardware Kit Components
-+
TB
3
J9
-+
-+
TB
4
JP4
J4
J3
JP2
JP3
LED1
LE
D
2
F2
F1
NOTE : The cover has been
removed for illustration
purposes only!
Three 24 VDC output circuits
One (1) non-power-limited
Two (2) power-limited
(Refer to the appropriate
appendix for more specific
information on output circuits)
Fuse F2 for battery
protection
Batt +
Batt -
Green LED-
Indicates AC
power on
AC Power
HOT
Neutral
Earth Ground
Jumpers JP2 and JP3 for selecting 1-2
hour or 2-3 hour delay for AC loss
reporting. Default is immediate. See
“Configuring the APS2-6R” on page 14
.
JP4 UL 864 8th
Edition trouble
reporting
connector
TB4 AC
Fail/Brownout
Detection
See page 13 for
more information
Trouble Out (J3)
Trouble In (J4)
Yellow LED-
Indicates AC
or batt trouble
Figure 2.2 APS2-6R Board Layout