Honeywell MX8 Reference Manual Download

Page: 245 / 318

Admin Login

To login to Administrator mode, tap the

Admin Login

button.

Once logged in, the button label changes to Admin Logout. The admin is automatically logged out when the SCU is exited. The
Admin can either tap the

Admin Logout

button, or the

button to logout. The Administrator remains logged in when the

SCU is not closed and a Suspend/Resume function is performed.

Enter the Admin password (the default password is SUMMIT and is case sensitive) and tap

. If the password is incorrect,

an error message is displayed.

The Administrator default password can be changed on the

Global

tab.

The end-user can:

Turn the radio on or off on the Main tab.

Select an active Profile on the Main tab.

View the current parameter settings for the profiles on the

Profile

tab.

View the global parameter settings on the

Global

tab.

View the current connection details on the

Status

tab.

View radio status, software versions and regulatory domain on the Main tab.

Access additional troubleshooting features on the

Diags

tab.

After Admin Login, the end-user can also:

Create, edit, rename and delete profiles on the

Profile

tab.

Edit global parameters on the

Global

tab.

Enable/disable the Summit tray icon in the taskbar.

7-9

Summary of Contents for MX8































































































































































































































































































































Search results

Summary of Contents for MX8

Reviews:

Related manuals for MX8

Brands by name

Popular brands

Honeywell MX8, Reference Manual

Search results

Summary of Contents for MX8

Reviews:

Related manuals for MX8

Brands by name

Popular brands