Honeywell MN6105A1011 Manual Download Page 8

VRN PRESSURE INDEPENDENT CONTROL VALVES AND ACTUATORS

38-00032—01

8

MVN Actuator

APPLICATION

MVN 3Nm (27 lb-in.) Control Valve Actuator is used with 
the VRN2 Pressure Independent Control Valves to control 
hot and chilled water with glycol solutions up to 50% in 
heating, ventilating, and air conditioning (HVAC) systems 
to provide two-position or modulating functions. 

FEATURES 

• Non-spring Return

• Floating and modulating

• Space saving, click-on installation – no tool required

• Extendable position indicator for easy commissioning

• Available with or without cable

• Compatible with control ball valves from 1/2 to 1-1/4 

inches.

• Actuator can be mounted on the valve in any of four 

positions.

Fig. 3. Dimensions; see Table 5 on page 6.

SPECIFICATIONS

Actuator Type: 

 Valve

Rotational Stroke:  

90° ±3°.

Fail Safe Mode: 

 Non-spring return, Fail in place

Torque:  27 lb-in. (3 Nm). 

 

 External Auxiliary Switches Available: 

 No

Supply Voltage: 

 24 Vac +20%, -15%, 24 Vdc

Power Consumption: 

 5 VA- Modulating, 1.5 VA - Floating, 

6 VA - Fast Acting SPDT

Environmental Rating: 

 NEMA2

Frequency: 

 50 Hz; 60 Hz

Mounting: 

 Click-on installation – no tool required

Noise Rating at 1m (Maximum): 

 35 dB(A) max at 1 m 

[50 dB(A) for MVN643].

Materials: 

 Plenum rated plastic housing

Operating Humidity Range (% RH): 

 

5 to 95% RH, non-condensing

Ambient Temperature Range: 

 

-4°F to 131°F (-20°C to 55°C)

Storage Temperature Range:  

-40°F to 176°F (-40°C to 80°C) 

Weight: 

 0.6 lb. (0.27 kg)

Dimensions: 

 See Fig. 1 and Table 5.

Timing: 

 90 sec. (+/-10%) for MVN613 and MVN713; 

30 sec. (+/-10%) for MVN643

Electrical Connections: 

 Field wiring 18 to 20 AWG to 

screw terminals, located under the removable access 
cover.

Humidity Ratings: 

 5% to 95% RH non-condensing.

Design Life (at Rated Voltage): 

60,000 cycles; 1 cycle = 0°…90°…0°

Cable Specification: 

18 AWG, Plenum Rated, 300 V, 10 A, 3 ft. length from end of 

access cover.

Environmental Protection Ratings: 

 IP40.

Approvals: 

UL/cUL
UL60730

To order actuator with accessories order actuator part 

accessory. For example: MVN61 C1

E

B

CLEARANCE ABOVE ACTUATOR 3/4 (19)

G

M34969

MVN WITH 2-WAY BALL VALVE

Table 7. Actuators and Accessories

Actuator

Description

Accessory

MVN613A0000

Floating control ball valve actuator

C1- 1 meter 

cable

MVN643A0000

Fast acting SPDT contol ball valve actuator

MVN713A0000

Modulating control ball valve actuator

Summary of Contents for MN6105A1011





















Reviews: