Honeywell Minitrend QX, User Manual

Page: 159 / 324

43-TV-25-30 Iss.6 GLO Aug 07 UK 153
User Variables
(Main Menu > Process > User Variables)
User variables provide the user the ability to set values for up to 32 variables to be used with-
in the maths and script.
• Modify - allows the user to set and edit the variables.
• View - the user can view the variables
The User variable function allows a system to be setup where values can be altered to effect
calculations without having to change the configuration. The variables can be used within
the Maths and script using UV1 to UV32 and can also be set within the maths using the func-
tion UVSET[x,y] where x = the user variable number 1 to 32 and y is the value. The User
variables are also non-volatile.
See “Appendix B: Maths Expressions” on page 271.
Script Timers
(Main Menu > Process > Script Timers)
Script timers provide 20 independent timers to be used as desired. Previously control and
access of script timers was limited to maths functions for use in script but this has now been
extended allowing the timers to be controlled using the event system.
Select a Timer that can be stopped, started and reset.
Access to timers via the script is still available in “Maths Variable and Function Tables”
on page 272.
Reports (Process)
(Main Menu > Process > Reports)
Reports can be generated manually or on a periodical basis using event system to show dai-
ly/weeks/monthly totals, max mins, averages etc., the reports can be printed, e-mailed as
attachments or exported to external media. The reports will be in RTF format for use in MS
Word or other compatible word processors.
Before a report can be run the report details must be entered in “Reports menu” on
page 118 .
To trigger a report using the event system see “Event Effects” on page 91 .
• Run - This will list the reports that are available.
Before a report can be run the
report details must be entered in “Reports menu” on page 118 . Once a
report in selected from the list then report is immediately created.