background image

U s e r   I n s t r u c t i o n s   -   E n g l i s h

8

Operating the Vi-Go Automatic Cable Sleeve

To ascend or descend, climb the ladder in normal fashion.  The cable sleeve will follow 
automatically.

Bypassing 

Automatic Pass-

Through Cable 

Guides:

  As the cable 

sleeve encounters the 
Intermediate Automatic 
Pass-Through Cable 
Guides, it will smoothly 
bypass without manual 
assistance.  

Bypassing Manual Pass-Through Cable 

Guides: 

 To bypass Intermediate Manual Pass-

Through Cable Guides, snap the cable out of the 
cable guide.  Once the cable sleeve has passed 
the cable guide, reconnect the cable into the cable 
guide.  

WARNING:  DO NOT REMOVE CABLE

SLEEVE FROM CABLE TO PASS 

INTERMEDIATE CABLE GUIDES.

When climbing is completed, remove the cable
sleeve and properly store according to the 
maintenance instructions in this manual.

▲ When using the Vi-Go 

Automatic Cable Sleeve with 

MANUAL Pass-Through Cable 

Guides

, you must snap the cable 

out of the cable guide to bypass.

The Vi-Go Automatic Cable Sleeve is to be directly connected to the front attachment 
point, designated for ladder climbing, of a Miller full-body harness using a Miller ap-
proved auto-locking carabiner or other Miller approved connector.

WARNING:  The maximum length of the connector from the attachment 

point on the harness to the cable must not exceed 9” (228mm).

1. Don a full-body harness according to the manufacturer’s instructions.  Check har-

ness to ensure that all straps are connected, buckles are secure, and harness is

adjusted to provide a snug fit.  

[

NOTE:  All instructions 

and warnings provided with the

body wear must be read and understood before using the equipment.]

2. Attach the cable sleeve to the front attachment point of the harness using a Miller 

approved carabiner (or connector).  Do not use connecting devices, such as a chain
assembly, quick link, or lanyard or substitute with non-Miller approved connectors.

3. Verify that the carabiner (or connector) keeper/gate is closed and locked.

Connecting the Vi-Go Automatic Cable Sleeve

to Full-Body Harness

◄ Whether climbing or descending, 

no manual assistance

is required to bypass

AUTOMATIC Pass-Through 

Cable Guides

.

netzerotools.com

netzerotools.com

Summary of Contents for Miller TRCS


















Reviews: