ENS5001R2 KO06 2005
1
MCV2000 SERIES
2-WAY HYDRONIC VALVES
PRODUCT SPECIFICATION SHEET
APPLICATION
The MCV2000 series are designed for residential
hydronic heating and cooling control applications.
The MCV2000 series 2-position hydronic valves are
used in residential and small commercial applications
to control the flow of hot and/or cold water. They
consist of actuator and valve.
FEATURES
Control by a low or line voltage SPST or SPDT
controller
100~130 VAC or 200~240VAC actuators available
Minimal actuator power consumption
Pressure differential up to 3.5bar
Versatile valve(1/2” ~ 1 1/4”) selection
1~90
°
C fluid temperature
0~65
°
C ambient temperature
Contents
Application ………………………………………………… 1
Features …………………………………………………… 1
Specification ……………………………………………... 1~3
Dimensions ………………………………………………… 3
Installation …………………………………………………. 4
Wiring Diagram ……………………………………………… 4
Pipe connection
: PT
Maximum pressure
: 10bar max.
Electrical termination : with integral 1000mm lead-wire cable
Ambient Temperature
:
0 ~ 65
°
C
Ambient Humidity
:
10 ~ 95%RH (no condensing)
Storage temperature
:
-25 ~ 65
°
C
Storage Humidity
: 10 ~ 95%RH (no condensing)
Voltage
: AC110/220V±10%, 50/60Hz
Colour-coded
label
: Green, Black, White
Control
Performance
: SPST/SPDT control
Power
consumption
: 6W at nominal voltages
(during valve position change only)
Operational life
: Greater than 60,000 cycles (all loads) for
motor and valve contacts at 110/220V
Timing
: 7.5sec (20sec in case 1 1/4” valve)
SPECIFICATION